ASI 04692AC Recessed Automatic Roll Paper Towel Dispenser and Waste Receptacle
**Please see each picture before purchase. If not pictured, it is not included in purchase**
-Dispenser shall be powered by C-UL-US and CE approved internal low-voltage adapter (supplied) using 110-240VAC, 50/60 Hz and providing output of 5VDC @ 1A and shall operate automatically to activate towel dispensing when hands are placed in sensor zone
-Unit shall feed out a 12" (305) length of towel during each activation and shall have an internal tear-off bar for towel pull out
-Cabinet, waste container and frame shall be fabricated of 22 gauge type 304 stainless steel alloy 18-8
-Towel dispenser door shall be 18 gauge same grade
-All exposed surfaces shall have No. 4 satin finish
-Door shall be attached to cabinet at side with a full-length 3/16" diameter (Ø 4.8) stainless steel multi-staked piano hinge and shall be held closed with a tumbler lock keyed alike to other ASI washroom equipment
-Waste container shall have hemmed edges for safety and shall be retained by a tumbler lock keyed alike to other ASI washroom equipment
-Face trim shall be 1" (25.4) wide formed from one piece with no miters, welding or open seams and have 1/4" (6.4) square returns to wall
-Structural assembly of all components shall be of welded construction
-Cabinet shall have no exposed fastening devices or spot-welded seams
Waste Capacity: 17 gallons (64 liters).
Wall Opening: 15-3/4"W x 10"D x 54-1/2"H.
Overall Dimensions: 17-1/4"W x 10-1/4"D x 56"H.