2005 Crown GL-100 - 100 Gal. Commercial Stationary Steam Kettle, Nat Gas.

CROWN Model GL-100 , gas fired, self-contained, fully insulated, steam jacketed kettle, ASME Code stamped, National Board Registered, AGA, CGA and NSF certified. The unit comes standard with a spring assisted cover. The kettle shall be constructed with an exterior of type 304 stainless steel, #4 sanitary finish and four 6" stainless steel adjustable legs. The interior kettle liner shall be a one piece welded construction made with type 304 stainless steel with #4 sanitary finish, 2/3 jacketed and shall be furnished with a 2" tangent draw off valve as standard. The recessed control panel is located on the front side of the unit in full view of the operator and is easy to use. Standard controls include electronic ignition, direct immersion thermostat , water sight glass, cooking light, pressure gauge, and low water indicator light. Safety features shall include a low water cut off, pressure relief valve, pressure switch and a gas shutoff valve. A double wall kettle interior shall form a steam jacket around the lower 2/3 of the kettle. The bottom of the kettle shall be of hemispherical design for superior heat circulation. Construction shall be all welded satin finish, stainless steel, type 304. Convenience features shall include 2" (50 mm) sanitary draw-off valve with a heat resistant handle. For operation 115 VAC 1 phase, 50/60 Hz, A.S.M.E. code stamped for operation up to 35 psi (241 kPa). The steam kettle temperature ranges shall be between 165°F to 265°F (74°C to 130°C).