Annual Preventive Maintenance Program for Hobart M-802 & V-1401

Service Overview

This program is designed to maintain both the Hobart M-802 and V-1401 Mixers in optimal working condition. Tasks will cover essential oil changes, lubrication, inspection of key parts, and checks for common issues such as gearbox health, motor function, and more. Regular maintenance will help ensure your mixers run smoothly, extend their lifespan, and reduce the likelihood of expensive repairs.

$421.26

Per visit (includes travel, labor, and all inspections)

Pricing Breakdown:

Hourly Rate: $140.00/hr

Travel Fee: $50.00 (Discounted)

Hobart Lube Oil: $48.50 (Discounted)

Sight Glass: $36.00 (Discounted)

Tax: $6.76

Service Duration: 2 hours (depending on condition)

Plan Frequency: Two inspections per year

Why Choose This Program?

Comprehensive Coverage

All major maintenance tasks for both M-802 and V-1401 models with thorough inspections

Increased Longevity

Regular maintenance increases equipment lifespan and reduces major repair risks

Expert Care

Skilled technicians who understand the nuances of both models

Core Maintenance Tasks

Both M-802 & V-1401

1

Change Oil and Lubricate Gearbox

Complete gearbox service with manufacturer-specified lubricants

Drain old oil from gearbox and check for contamination

Replace with correct type and quantity per manufacturer specifications

Lubricate all moving parts thoroughly to reduce wear
2

Inspect and Replace Sight Glass (if applicable)

Ensure clear oil level monitoring capability

Check sight glass for cracks, fogging, or signs of wear

Replace if damaged or not providing clear visibility
3

Inspect and Clean Bowl Lift Mechanism

Bowl lift system maintenance and inspection

Check for smooth operation and lubricate mechanism

Look for signs of wear, rust, or damage that could impede function

Clean thoroughly and ensure proper alignment
4

Inspect for Oil Leaks

Comprehensive leak detection and prevention

Visually inspect for oil or grease leaks around seals and gaskets

Replace seals and gaskets if leaks detected to prevent contamination
5

Inspect Power Cord and Electrical Components

Critical electrical safety and functionality check

Examine power cord for damage, fraying, or exposed wires

Check electrical components for proper functionality

Clean dust and debris from electrical panel
6

Check Motor and Test Speed Control

Complete motor performance verification

Run mixer through all speed settings

Check for smooth operation without unusual noises or vibration

Verify speed control mechanism engages correctly
7

Test Safety Features and Emergency Stop Button

Critical safety system verification

Test emergency stop button, interlock systems, and safety switches

Ensure all safety features work correctly and check for faults
8

Inspect and Clean the Motor Fan

Cooling system maintenance for optimal performance

Clean motor fan of dust, grease, and debris for proper cooling

Check for damage that could affect motor performance
9

Inspect Attachments (Whisks, Dough Hooks, etc.)

Complete attachment system maintenance

Inspect all attachments for wear, cracks, or rust

Clean and sanitize attachments

Ensure proper fit and smooth rotation - replace worn items as necessary

M-802 Specific Procedures

M-802 Only

Inspect and Lubricate Bowl Drive Mechanism

Drive mechanism maintenance for smooth operation

Check bowl drive shaft for signs of wear, damage, or friction

Lubricate to ensure smooth operation when lifting and lowering bowl
Check and Clean Bowl Guard and Interlock System

Safety system inspection and verification

Inspect bowl guard for cracks or damage

Test interlock system to ensure mixer cannot operate without bowl guard in place
Inspect and Lubricate the Gearbox Bearings

Bearing system maintenance

Check gearbox bearings for signs of wear and lubricate

Maintain smooth, noise-free operation - recommend replacement if worn
Inspect Drive Belts for Tension and Wear

Belt system maintenance and adjustment

Check tension and condition of drive belts

Look for cracks or wear that could cause slippage or failure

Adjust tension if necessary and replace worn belts
Clean and Test the Speed Control Switch

Control system maintenance

Inspect speed control switch for proper operation

Clean contacts and test switch at each speed setting

Ensure no hesitation or failure in engaging speed changes

V-1401 Specific Procedures

V-1401 Only

Inspect and Lubricate the Bowl Lift Mechanism

Bowl lifting system maintenance

Check bowl lift mechanism operates smoothly without noise, wear, or resistance

Lubricate mechanism as necessary to prevent rust and ensure smooth operation
Test and Inspect the Timer and Timer Mechanism

Timer system verification

Inspect timer to ensure proper functioning

Test that it starts, stops, and cycles correctly

Check that it turns off at the correct time
Check and Lubricate the Attachment Hub

Attachment hub maintenance

Inspect attachment hub for wear and cleanliness

Lubricate hub to prevent friction that could damage attachments

Ensure hub rotates freely
Inspect and Test the Gearbox Breather

Gearbox ventilation system maintenance

Inspect gearbox breather for clogging or dirt buildup

Clean breather to ensure proper air flow and maintain internal gearbox pressure
Check and Tighten All Fasteners and Bolts

Hardware security verification

Inspect all bolts, screws, and fasteners for looseness

Tighten any loose components to prevent mechanical failure during operation

General Maintenance

Both Models

Clean and Sanitize the Exterior

Hygiene and appearance maintenance

Clean exterior to remove dirt, grease, and food debris

Sanitize areas that come into contact with food products to meet health standards
Inspect and Test Emergency Stop Button and Interlock Systems

Final safety verification

Ensure emergency stop button and interlock systems are fully operational

Verify systems stop the machine when engaged
Inspect for Signs of Overheating

Thermal performance verification

Check motor and gearbox for signs of overheating (discoloration, unusual smells)

Test fan for proper airflow
Inspect and Clean the Power Switch

Primary control maintenance

Inspect power switch for smooth operation

Clean and lubricate switch contacts to prevent wear or electrical issues

What's Not Included

Internal Gearbox Overhaul: This plan does not cover the disassembly of the gearbox beyond routine oil changes and inspections.

Parts Replacement: Any parts needing replacement, such as belts, seals, or electrical components, will be quoted separately.

Ready to Schedule Your Comprehensive Maintenance Service?

Keep both your Hobart M-802 and V-1401 running at peak performance with our expert care!

Schedule Service Today