Skip to content
Free Shipping on All Compass Cooking & Refrigeration Equipment!
Free Shipping on All Compass Cooking & Refrigeration Equipment!

Hobart H-600 & L-800 Annual Preventive Maintenance Program

Service Overview

Maintain your Hobart H-600 and L-800 Mixers in optimal working condition with our comprehensive dual-machine maintenance program. We perform critical maintenance tasks including oil changes, sight glass replacement, inspections, and model-specific procedures.

$425.00 - $500.00
Complete service for both machines including travel and labor

Pricing Breakdown:

Hourly Rate: $125.00/hr
Travel Fee: $50.00
Service Duration: 3 - 4 hours

Why Choose This Program?


Comprehensive Maintenance

Covers both H-600 and L-800 with model-specific procedures


Expert Care

Skilled technicians familiar with both models


Cost-Effective

Prevent costly repairs and extend equipment lifespan

Shared Maintenance Tasks

Both H-600 & L-800
  • 1. Change Oil and Lubricate Gearbox
    Complete gearbox service with proper oil replacement
    Drain old oil and inspect for contamination
    Replace with manufacturer-specified oil type and quantity
    Lubricate gearbox thoroughly to prevent component wear
  • 2. Inspect and Replace Sight Glass
    Ensure proper oil level visibility and monitoring
    Check for cracks, cloudiness, or wear signs
    Replace if necessary for optimal monitoring
  • 3. Check Bowl Lift Mechanism
    Lubricate and inspect for smooth operation
    Apply appropriate grease for efficient operation
    Inspect for wear, rust, or misalignment
  • 4. Check for Oil Leaks
    Comprehensive leak detection and repair
    Visual inspection around seals and gaskets
    Replace worn seals or gaskets if leaks detected
  • 5. Inspect Power Cord and Electrical Components
    Critical electrical safety inspection
    Check for fraying, exposed wires, or burn marks
    Verify proper functionality of all electrical components
  • 6. Inspect and Test Speed Control
    Verify smooth operation across all speeds
    Test functionality across all speed settings
    Check for proper engagement and smooth transitions
  • 7. Check and Test Motor Housing
    Motor integrity and performance verification
    Inspect for cracks, wear, or overheating damage
    Run motor and check for unusual noises or vibrations

H-600 Specific Procedures

H-600 Only
  • 1. Clean and Inspect Hub and Attachments
    Comprehensive attachment system maintenance
    Clean attachment hub and inspect for damage, wear, or rust
    Ensure hub rotates smoothly and securely
    Check attachment mechanism functionality
  • 2. Check and Lubricate Bowl Drive Shaft
    Drive shaft maintenance for smooth operation
    Inspect bowl drive shaft for wear and lubrication needs
    Apply appropriate grease if necessary
  • 3. Inspect and Clean Motor Fan
    Cooling system maintenance
    Clean motor fan to ensure proper cooling
    Remove dust, debris, or grease buildup that impedes airflow

L-800 Specific Procedures

L-800 Only
  • 1. Check Bowl Guard Functionality
    Safety system inspection and verification
    Ensure bowl guard is secure and free of damage
    Check interlock system activation
  • 2. Inspect and Lubricate Bowl Lifter
    Bowl lifting mechanism maintenance
    Inspect bowl lifter for proper movement
    Lubricate for smooth lifting and lowering
    Check for wear or rust that could impair movement
  • 3. Check and Replace Oil Filter
    Oil filtration system maintenance (if applicable)
    Inspect oil filter for clogging or contamination
    Replace filter to ensure clean gearbox oil

General Maintenance

Both Models
  • 1. Test All Speed Settings
    Complete operational verification
    Run mixer through all speeds checking for smooth operation
    Listen for unusual noises, jerky movements, or vibrations
  • 2. Inspect and Tighten Fasteners
    Structural integrity verification
    Check all screws, bolts, and fasteners for looseness
    Tighten to appropriate torque specifications
  • 3. Clean and Sanitize Exterior
    Hygiene and appearance maintenance
    Remove dirt, grease, and food debris
    Sanitize food-contact areas
    Check for rust, corrosion, or visible damage
  • 4. Test Emergency Stop and Safety Features
    Critical safety system verification
    Test emergency stop button functionality
    Verify interlock systems work correctly

What's Not Included

Gearbox Overhaul: This plan does not include disassembling or replacing internal gearbox components beyond routine oil changes and inspections.

Parts Replacement: Any parts that require replacement (e.g., seals, belts, electrical components) will be quoted separately.

Ready to Schedule Your Dual-Model Maintenance?

Keep both your Hobart H-600 and L-800 running at peak performance with comprehensive care

Schedule Service Today